Continuous Mixer - the need for timely clean-up day used resin sand sand sand production line slots and sand on the blade, a sand tank to adjust the distance between the blades and the sand every week, usually 3-5mm, or cause sand ineffective. - Double sand three punks need to be cleared up sand vertical mixing cage resin sand production line supplier of day, single-class need a week to remove the vertical mixing cage inspection repair blades. Recycling Machine - monthly rotating disc opens door to check the parts are damaged, if it is broken or damaged soon need to find a repairman adjustments, replacements; - Keep rotating disk bearing Dayou once (when Dayou 2/3 butter and 1 / 3 oil and mix well, pour Dayou barrel, cover tightly, hand push the handle back and forth Dayou Dayou 5-6 times to) five tons of resin sand production line, bearing if the lack of oil or dust cover is broken, bearing soon will be worn or stuck, resulting in maintenance more difficult. Routine maintenance 1.1.1, the class must be of Blown Sand equipment, pit and surrounding areas for cleaning, to ensure that equipment and surroundings clean and tidy. 1.1.2 scrap, after the class ended, shakeout machine table, countertop delete grid hole and around and around and waste drum magnetic separators and other places shall promptly clean up. 1.1.3, clean the inside of the dust filter bag, dust assurance work. 1.1.4, required equipment make strong security work weekends. 1.1.5 After the class ended, crushers and screening Raster clogged pores must promptly clean up the debris. 1.1.6 After the class ended resin sand production line, through the magnetic separator iron slag material, winnowing shaker dust and waste should be cleaned up promptly. Operator awareness of a production line, production line components: including shakeout system, crushing systems, regeneration system, sand transfer systems, gas delivery system, dust removal system. 2, sub-systems of law: under the sand in front of a library material level to the next device on the sand library contains material position is the one system. 3, from the device to stop the general principles: open shun shut down, no-load start and stop. Shun shut down the open side of the device that is subject to the open sand, according to the direction to stop the sand into stopping. Load refers to the equipment at the time of start-stop-start-stop load requirements can not have the sand. 5 tons of resin sand production line | Qingdao Heng (certified) | resin sand production line provided by Heng Machinery Co., Ltd. Qingdao. Qingdao Heng Machinery Co., Ltd. (www.thjidian.com) is Qingdao, cleaning, cleaning equipment leader, over the years, the company is implementing the scientific management, innovation and development, the principle of honesty and trustworthiness, and satisfy customer needs. Qingdao Heng led the staff warmly welcome all inquiries negotiations to create a better future Qingdao Heng.