| Detailed Product Description： | Sand conditioning system before starting the preparation ①, check sand temperature regulator cylinder, level meter is reliable, water, air pressure is within the normal range. ②, check sand transfer large gate is flexible, pneumatic pressure is within the normal range, the material is smooth. Operation ①, manual operation sequence: The Knob switch to "Manual", and press sand transfer large gate (to open this gate must ensure that when adjusting the material sand sand-bit) . (Time intervals controlled by the operator's own) Note: Do not use the manual under normal circumstances. ②, automatic operation: the Knob switch to the "auto" position resin sand production equipment prices, press → then press the "sand transfer system" button. During sand when the sand temperature exceeds the setpoint temperature, sand transfer large gate closes automatically and start circulating pump → cooling tower fan; sand temperature below the auto stop circulating pumps and cooling tower fan set point temperature of the sand. Also in the material level without material sand transfer large gate is automatically closed. Open daily maintenance 1.1.1 chillers, the class must be of Blown Sand equipment, pit and surrounding areas for cleaning, to ensure that equipment and surroundings clean and tidy when sand summer when the temperature does not drop down. 1.1.2 scrap, after the class ended, shakeout machine table, table Raster hole and around and around and waste drum magnetic separators and other parts to be time to clean up. 1.1.3, clean the dust filter bag, warranties filter is working properly. 1.1.4 Equipment required to make a weekend of strong security work. 1.1.5 After the class ended, crushers and screening Raster debris clogging the hole shall be cleaned up promptly. 1.1.6 After the class ended, iron slag material through the separator, winnowing shaker dust and waste shall be cleaned up promptly. Routine maintenance 1.1.1, the class must be of Blown Sand equipment, pit and surrounding areas for cleaning, to ensure that equipment and surroundings clean and tidy. 1.1.2 scrap, after the class ended, shakeout machine table, table Raster hole and around and around and waste drum magnetic separators and other parts to be time to clean up. 1.1.3, clean the dust, sand resin production equipment manufacturers in the dust bag to ensure filter is working properly. 1.1.4 Equipment required to make a weekend of strong security work. 1.1.5 After the class ended, crushers and screening Raster debris clogging the hole shall be cleaned up promptly. 1.1.6 After the class ended, iron slag material through the separator, winnowing shaker dust and waste shall be cleaned up promptly. Resin sand production equipment | Qingdao Heng (Online) | resin sand production equipment from Qingdao Heng Machinery Co. Qingdao Heng Machinery Co., Ltd. (www.thjidian.com) is in Qingdao, Shandong Cleaning equipment leader, over the years, the company is implementing the scientific management, innovation and development, the principle of honesty and trustworthiness, and satisfy customer needs. Qingdao Heng leadership with the staff warmly welcome all inquiries negotiations to create a better future Qingdao Heng. |
| No.13634768
