Blade mixer for mixing resin-bonded sand. Such Mixer Using rotary vane, dry sand sand sand into the two slots, the binder is added thereto a sand bath, hardening agent is added to another tank with sand premixed raw sand, then from the end of the exit slot into the vertical agitator sand, fast Hunban after discharge, filling sand box or core box. After fill immediately and automatically cut off access hardener and adhesives, while closing the gate and into the sand tank exclude residual sand clean. Rotor type sand mill in 1960 after the start of production for casting, Shandong sand machinery manufacturers, the products developed rapidly, the machine has the characteristics of each structure, a great rolling wheel Mixer and a short length of the potential dispute. Rotor type sand mill is to improve the spindle speed, and high-speed rotor to hit and throw sand were stirred to achieve a variety of raw materials mixed purposes. Starting point of this sand principle is: the current high-pressure molding machine with sand, clay content but low water, "plastic" small and "brittle" big sand, it can be used to strengthen the stirring method sand to make sand to get the right physical and mechanical properties. Practice 1, must wear protective shoes before entering the shop good, helmets, masks, gloves and other protective equipment, sand mechanical action, otherwise not allowed into the workshop. 2, Mixer operator must be familiar with the structure and performance of the equipment. 3, the new sand mixer is subject to screening, drying; subject after the old sand sand reclamation process, can be used. 4, when added to the resin and hardener, sand machinery manufacturers, must wear gloves, glasses, careful not to splash him. It requires accurate proportion. 5, before the start Mixer, check both sides of the rails, whether there are obstacles, driving, pay attention to passers-by. 6, in operation, there should be someone in charge, can not pay other personnel to operate and avoid illegal operation. 7, when a sand mill for maintenance, in addition to cut off the power, but also set up special monitoring. 8, in the clean sand troughs to stop cleaning, sand machine, the spiral blade clean up in preparation for the next sand. 9, the timely removal of sand scattered on the work site and articles to keep workplace and walkways clean and clear, to facilitate safety. Mixer machinery quotes, sand machinery, provided by Qingdao Qingdao Heng Heng Machinery Co. Qingdao Heng Machinery Co., Ltd. (www.thjidian.com) strong, credible, in Qingdao, Shandong Cleaning equipment industry has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead Qingdao Heng and you hand into the brilliant, for a better future!